Слайд 0
© “Mars-Energo”, St. Petersburg, 2015
Making Energy Visible
25-year Experience in Power Industry
Слайд 1
Established in 1991 Mars-Energo specializes in design, manufacturing and service of high accuracy metrological equipment and meter test systems for power industry applications.
Mars-Energo’s reference instruments provide calibration services covering a wide range of measuring instruments for power quality control and electricity metering: instrument-class current and voltage transformers, power quality analyzers, electric energy meters including measuring instruments for digital substations and Smart Grids.
Company
Слайд 2
Meter Test Systems
Calibration, adjustment and accuracy tests of reference- and service- class measuring instruments:
Electric energy meters
Wattmeters, varmeters and instrument converters
AC and DC amperemeters and voltmeters
Power quality analyzers
Purpose
Слайд 3
Transformer Test Sets
VT Test Set
VTs rated 6 to 330 kV
CT Test Set
CTs rated 5 kA or 30 kA
Applicable to comprehensive testing of transformer substations
Purpose
Accuracy class 0,05
Слайд 4
Power Quality Analyzers
Purpose
Measurement and monitoring of power quality parameters specified in IEC 61000-4-30 and IEC 61000-4-7 standards
with further transfer of measurement results to a PC (power quality test reports according to EN 50160)
Measurement and monitoring of basic electrical network parameters
Слайд 5
Reference Instruments for Digital Substations
6
Reference instruments for testing and calibration of electronic and digital transformers designed in conformity with IEC 60044-7-2010 and IEC 60044-8-2010 standards
The equipment accepts signals (e.g. IEC 61850-9-2LE signals) from analogue or digital outputs of electronic and digital current (up to 5 kA) and voltage (up to 330 kV) transformers
Purpose
Слайд 6
Traceability of Measurements From National Standard of AC Power
Слайд 7
Stationary Meter Test System MTS ME 3.1KM
Energomonitor 3.1KM
reference meter
1 mA…120 А
0.1…960 V
50 harmonics
Accuracy class 0.02; 0.05
Designed for testing
single- or three-phase meters of active or reactive electric power and energy
ammeters, voltmeters, phase-meters etc.
frequency meters
PQP analyzers
Three-phase phantom power source
Signals generated:
harmonics (up to 50th),
interharmonics ,
flicker, unbalance,
dips, swells,
or special IEC 62053-22
standard waveforms
AC/DC
Слайд 8
Mobile Meter Test System MTS ME 3.3
3-phase
1 mA ? 12 A
6 ? 268 V
50 harmonics
Слайд 9
Power Calibration System PCS ME 1.0
Field of application
Direct dissemination of active (W) and reactive (Var) measurement units from the State Primary Standard of AC power to measuring instruments of reference- and service class;
Accuracy testing and top-level calibration of measuring instruments mentioned above;
Generating test waveforms.
Expanded uncertainty of AC active/reactive power measurements:
±0.004 % (PF = 1)
±0.006 % (PF = 0.5)
PCS ME 1.0 can be applied as a Standard of Active and Reactive Electrical Power
Слайд 10
D.I. Mendeleev National Institute for Metrology (December 2012)
Acceptance of National Standard of AC Power by representatives of Federal Agency on Technical Regulating and Metrology
Слайд 11
PQP Energotester
Designed to
measure and log electrical signals and power quality parameters as defined by IEC 61000-4-30 (class A) and IEC 61000-4-7
measure and log of basic electrical energy values in single- and three-phase networks including RMS of currents and voltages, active, reactive, apparent power and energy
Accuracy class 0.1
Слайд 12
Mars-Energo Reference Equipment for Conventional Substations
CT/VT Test System ME Audit
CT Test Set
5 kA; 30 kA
VT Test Set
6 to 330 kV
Meter test set
Multipurpose Test Systems
MTS ME 3.3T1-P
MTS ME 3.1KM-P
MTS ME 3.1KM-S
Multipurpose Reference Standards
Energomonitor 3.3T1
Energomonitor 3.1KM-P
Energomonitor 3.1KM-S
Слайд 13
Multifunctional Reference Meter Energomonitor 61850
Reference instrument of new generation meant for testing of non-conventional (electronic and digital) current and voltage instrument transformers and Merging Units
Purpose
Measurement of ratio and angular errors of current and voltage scaling converters (electronic and digital instrument transformers) with analogue outputs or digital (Sampled Value) outputs according to IEC 61850-9-2LE
Determining accuracy characteristics of Merging Units (IEC 61869-13)
Measurement of current- and voltage-related quantities with further conversion into IEC 61850-9-2LE compliant data streams
Слайд 14
Materials were prepared by VNIIM and Mars-Energo specialists in cooperation
D.I. Mendeleev Institute for Metrology (VNIIM) www.vniim.ru
Dr. Efim Z. Shapiro Head of Electric Power & Energy laboratory
Gleb Gubler, Ph.D Leading research scientist of Electric Power & Energy laboratory
Mars-Energo www.mars-energo.com
Ildar Giniyatullin Director
Mars-Energo
V. O. 13 Line, 6-8 Saint-Petersburg, Russia, 199034
Tel./Fax: +7 812 331-87-36
E-mail: [email protected]
[email protected]
www.mars-energo.com
